Knife Edge Disconnect Terminals - Unipro Industrial Electrical Importers NZ Ltd

KEYWORD SEARCH:

Product Range

LUME & LUCA Enclosures

LUCA Distribution Boards

UNIPRO Splitter Units

PRO SERIES Circuit Protection

ADEMARK Cable Marking System

ELMEX Rail Terminals

ILME CEE Style Plugs and Sockets

LUCA Slotted Duct

UNIPRO Under Verandah Fittings

KASUGA Floatless Relays

SIEMENS IP65 Switch Isolators

ATLANTIS Weather Proof Switches

Information

Knife Edge Disconnect Terminals

ELMEX RAIL TERMINALS
UNIVERSAL RAIL MOUNTED KNIFE EDGE DISCONNECT TERMINAL
KUDT 4

Ratings
Conductor Size
Thickness, T
: 350 V; 10 Amps
: 0.5 - 4 sq.mm
: 6.5 mm

Ideal for Control Signals of C & I package
The Faults in the circuit can be simulated by convenient disconnection by operating the hinged lever with the help of screw-driver tip or tester only, during commissioning of the control cubicle.
Disconnect operation is offered for testing purpose without disturbing the connected conductors.
Screw clamp termination system for internal and field conductor.
Clip-on arrangement for mounting on 32 mm and 35 mm channel.
Insulation Housing and End Plate made of industrial grade Thermoplastic, Nylon 66.
Terminal with Heat Treated Contact Clamps having 1.5 times the Rated Torque withstanding Capacity.

TECHNICAL DATA

DOUBLE DECK TERMINAL : KUDD 4
Ratings Conductor Size Insulation Stripping Length H (when mounted on 32mm Channel) x WxT H² (when mounted on 32mm Channel) x WxT Torque required for Screw Standard Packing Suitable lug Insulation Housing Colour Standard On request	: 350 Volts : 10 Amps : 0.5 sq. mm to 4 sq mm : 12 mm : 43.3 mm x 43.5 mm x 6 .5mm : 38.7mm x 43.5 mm x 6.5 mm : 5.0 kg.Cm* : 100 Nos. : 2.5 sq mm = WPC -7 Dowell’s or equiv. : 4 sq mm - WPC - 16 Dowell’s or equiv. : Nylon 66 : Grey : Red, Yellow, Blue, Black
ACCESSORIES
Mounting Channel CHS CHK	Type : CHS : 32 mm - Thickness : 1.5 mm CHK : 35 mm - Thickness : 1.0 m Material: CRCA - Steel Plating : Alkaline Zinc with Yellow Passivation Type : Length CHS-3 : 300mm CHS-5 : 500mm CHS-10 : 1mtr. CHS-20 : 2mtr. CHK-3 : 300mm CHK-5 : 500mm CHK-10 : 1mtr. Also available in other lengths - on request.
Side Clamps SCS SCSN SCKN SCUN	Type : SCS : Metallic : For CHS, Thickness: 11 mm - Standard Pkg : 200 Nos. SCSN : Nylon 66 : For CHS, Thickness : 8.4 mm - Standard Pkg : 100 Nos. SCKN : Nylon 66 : For CHK, Thickness : 8 mm - Standard Pkg : 100 Nos. SCUN : Nylon 66 - Standard Pkg : 100 Nos
End Plate	Type : EP -DT - Material : Nylon 66 - Thickness : 1.5 mm - Standard Packing : 100 Nos.
Marking Label	Type : LABEL - K 6.5 - Standard Packing : 100 Nos.
Snap - on Marking Label	Type : LABEL - A - 3 Digits / Combination of alphanumeric / Blank - Material : PVC - Standard Packing : 100 Nos.
Snap on Type Marking Label	Type : LABEL - K 6.0 - 3 Digits / Combination of alphanumeric / Blank
Group Marking Carrier	Type : GMC - For Channel type CHS

*This terminal contains Heat Treated Contact Clamp Assembly which can withstand 1.5 times the Torque Value i.e. 8.0 kg cm as compared to 5.0 kg cm mentioned in IEC-947 and VDE 0611.
Technical Specifications may change in line with Technical Advances and industry Standards