ILME

• CEE Style International Pin Configuration
• colour coded according to operation voltage:
• Blue 200-250V
• Red 380-415V
• Main Body Colour grey RAL 7035
• Enclosure, Insert and Spring Lid manufactured in insulating self extinguishing thermoplastic.
• Plugs and couplers have internal cable clamps.
• Gaskets manufactured from Anti-ageing material
• Ultraviolet resistant
• 63 amp and 125 amp units have nickel plated contacts
• 63 amp and 125 amp units have a Pilot Pin
• Socket outlets will only accept plugs with corresponding voltage, amperage and pin configuration
• Combination switch sockets have double mechanical Interlock that prevents switching “on” the switch when the plug is not inserted, or withdrawing the plug when the switch is turned “on”
• IP 67 watertight accessories with bayonet locking device.  The degree of protection is obtained for the sockets with the plug fitted or the lid closed.  The degree of protection is obtained for the plugs when inserted into the socket
• Manufactured according to BS EN 60309-1-2

• All the components (modules, boxes, covers) are manufactured in glass fibre reinforced polyester (PETP), colour grey RAL 7035.
• Therefore they are particularly resistant to shocks, heat, sustained arcing, tracking, self-extinguishing class V-0 according to UL 94, resistance to the glow-wire test at 960C according to IEC 695-2-1.
• The resistance to corrosions together witht he use of stainless steel for all exterior metallic parts (screws, pins, springs, etc) and the high degree of protection of the series (IP 67), gives to this system a great reliability under severe ambient conditions: open air installations, places subject to atmospheric aggressions, low temperatures, tropical climate.
• This series is suitable for applications in ambiences with a greater risk in case of fire.
• Degree of protection (BS EN 60529) IP 67.